{"id":1904,"date":"2021-11-26T09:09:08","date_gmt":"2021-11-26T09:09:08","guid":{"rendered":"https:\/\/www.compassis.com\/notas-de-la-version-tdyn\/"},"modified":"2025-07-11T08:09:33","modified_gmt":"2025-07-11T08:09:33","slug":"tdyn-releases-notes","status":"publish","type":"page","link":"https:\/\/www.compassis.com\/en\/tdyn\/tdyn-releases-notes\/","title":{"rendered":"Tdyn Releases notes"},"content":{"rendered":"\n<h2 class=\"wp-block-heading\">News in <strong>version 16.6.2<\/strong><\/h2>\n\n\n\n<ul class=\"wp-block-list\">\n<li>GiD version used: <a href=\"https:\/\/gidsimulation.atlassian.net\/wiki\/spaces\/GWN\/pages\/3011739649\/16.0.9\" target=\"_blank\" rel=\"noreferrer noopener\">16.0.9<\/a><\/li>\n\n\n\n<li>Minor bugs corrected.<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\">News in <strong>version 16.6.1<\/strong><\/h2>\n\n\n\n<ul class=\"wp-block-list\">\n<li>GiD version used: <a href=\"https:\/\/gidsimulation.atlassian.net\/wiki\/spaces\/GWN\/pages\/3011739649\/16.0.9\" target=\"_blank\" rel=\"noreferrer noopener\">16.0.9<\/a><\/li>\n\n\n\n<li>Minor bugs corrected.<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\">News in <strong>version 16.6.0<\/strong><\/h2>\n\n\n\n<ul class=\"wp-block-list\">\n<li>GiD version used: <a href=\"https:\/\/gidsimulation.atlassian.net\/wiki\/spaces\/GWN\/pages\/3011739649\/16.0.9\" target=\"_blank\" rel=\"noreferrer noopener\">16.0.9<\/a><\/li>\n\n\n\n<li>Release of a<strong> Fatigue Damage Assessment applied to composite laminates<\/strong><\/li>\n\n\n\n<li>A new <strong>damper element<\/strong> has been added.<\/li>\n\n\n\n<li>Extensive improvements in the graphical interface for the <strong>postprocess<\/strong> and the use of<strong> local axes<\/strong>.<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\">News in <strong>version 16.2.6<\/strong><\/h2>\n\n\n\n<ol class=\"wp-block-list\">\n<li>GiD version used: <a href=\"https:\/\/gidsimulation.atlassian.net\/wiki\/spaces\/GWN\/pages\/2911207425\/16.0.7\" target=\"_blank\" rel=\"noreferrer noopener\">16.0.7<\/a><\/li>\n\n\n\n<li>Over 18 improvements to GUI elements such as the Tdyn Tree, Search Entry and Postprocess to provide a more robust and usable interface.<\/li>\n\n\n\n<li>Correction in the safe execution mode.<\/li>\n\n\n\n<li>It is possible to run a structural simulation with a SeaFEM result file in ASCII format.<\/li>\n\n\n\n<li>It is possible to use a Tdyn or SeaFEM load in a static structural analysis without using a TCL script.<\/li>\n\n\n\n<li>Energy results are now available in any type of structural analysis.<\/li>\n\n\n\n<li>General improvements in Seakeeping animations. It is no longer necessary to indicate in a form the name of mesh and result files.<\/li>\n<\/ol>\n\n\n\n<h2 class=\"wp-block-heading\">News in <strong>version 16.2.5<\/strong><\/h2>\n\n\n\n<h3 class=\"wp-block-heading\">New features<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li>GiD version used: 16.0.5<\/li>\n\n\n\n<li>Stresses and strengths result options have been reordered to make the Tdyn tree more understandable. Now, all these options are available in Stresses and strengths results.<\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\">General improvements<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Bug fixed in drawing symbols of triangular and hydrostatic loads.<\/li>\n\n\n\n<li>Bug fixed in contextual menu of Meshes and Results panels in Postprocess.<\/li>\n\n\n\n<li>Bug fixed in Limits checkbox in the Results panel.<\/li>\n\n\n\n<li>Bug fixed in Transform.<\/li>\n\n\n\n<li>Path of SN files is added to the CompassFEM tree.<\/li>\n\n\n\n<li>&nbsp;\u2018More\u2019 option in postprocess contextual menu has been removed.<\/li>\n\n\n\n<li>Fixed bug in input file (.dat) of writing local axes to nodes.<\/li>\n\n\n\n<li>Bug fixed in laminate materials edition.<\/li>\n\n\n\n<li>Warning message appears when a load group is empty.<\/li>\n\n\n\n<li>Bug fixed in Seakeeping-Ramseries coupled analyses.<\/li>\n\n\n\n<li>Fixed bug related to the selection of results in Postprocess preferences.<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\">NEW IN <strong>VERSION 16.2.4<\/strong><\/h2>\n\n\n\n<h3 class=\"wp-block-heading\">New features<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li>The example models (validation and tutorials) are not saved in the distribution because they are available on the website.\n<ul class=\"wp-block-list\">\n<li><a href=\"https:\/\/www.compassis.com\/en\/soporte-tdyn-cfd\/\">Tdyn CFD validation models and tutorials<\/a><\/li>\n\n\n\n<li><a href=\"https:\/\/www.compassis.com\/en\/soporte-ramseries\/\">Ramseries validation models and tutorials<\/a><\/li>\n\n\n\n<li><a href=\"https:\/\/www.compassis.com\/en\/soporte-seafem\/\">SeaFEM validation models and tutorials<\/a><\/li>\n<\/ul>\n<\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\">General improvements<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Bug fixed in elastic constraints.<\/li>\n\n\n\n<li>Bug fixed about Isosurfaces in coupled analyses.<\/li>\n\n\n\n<li>Bug fixed in Body Joints of SeaFEM<\/li>\n\n\n\n<li>Bug fixed in &#8216;Start data&#8217; window.<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\">New in <strong>version 16.2.3<\/strong><\/h2>\n\n\n\n<h3 class=\"wp-block-heading\">New features<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Gid version used: 16.0.3<\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\">General improvements<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Bug fixed in boundary mesh<\/li>\n\n\n\n<li>Bug fixed in Import postprocess files to Standard postprocess.<\/li>\n\n\n\n<li>Bug fixed in reading transverse strength in laminates<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\">New in <strong>version 16.2.0<\/strong><\/h2>\n\n\n\n<h3 class=\"wp-block-heading\">New features<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li>GiD version used: 16.0.0<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"new-in-version-14-0-1\">New in <strong>version 14.0.1<\/strong><\/h2>\n\n\n\n<h3 class=\"wp-block-heading\">New features<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li><span style=\"font-family: var(--list--font-family); background-color: var(--global--color-background); color: var(--global--color-primary); font-size: var(--global--font-size-base);\">Undo window added to the Tdyn postprocess menu options<\/span><\/li>\n\n\n\n<li>Performance improved in the streamlines post-processing tool<\/li>\n\n\n\n<li>Improvements in the GUI layout: Tdyn data tree panel can be docked to both, left and right sides of the main window<\/li>\n\n\n\n<li>Improvements in the new Help system<\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\">General improvements<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Bug fixed in RamSeries structural solver concerning the calculation of strengths when using hybrid meshes (mixing element types)<\/li>\n\n\n\n<li>Bug fixed in fluid material properties section of the data tree<\/li>\n\n\n\n<li>Bug fixed in the execution of Tdyn CFD+HT models using Parallel mode. Now, the maximum number of processors available is effectively used by default<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"new-in-version-14-0-0\">New in <strong>version 14.0.0<\/strong><\/h2>\n\n\n\n<h3 class=\"wp-block-heading\">New features<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Totally renewed graphic user interface<\/li>\n\n\n\n<li>First version of a new MPI parallel solver for CFD problems<\/li>\n\n\n\n<li>New coupling algorithm between the multiphysics (Tdyn CFD+HT) and the structural (RamSeries) solvers<\/li>\n\n\n\n<li>Fully parallelized calculation of structural problems with multiple load cases<\/li>\n\n\n\n<li>Enhanced Fatigue Damage Assessment (FDA) capabilities<\/li>\n\n\n\n<li>Enhanced fluid-boundary mechanical contacts<\/li>\n\n\n\n<li>New GUI capabilities for easy definition of SeaFEM body links<\/li>\n\n\n\n<li>New tutorials and interactive Help system<\/li>\n\n\n\n<li>Fully updated Linux version<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"new-in-version-12-2-3\">New in <strong>version 12.2.3<\/strong><\/h2>\n\n\n\n<h3 class=\"wp-block-heading\">New features<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Morison elements implemented in SeaFEM.<\/li>\n\n\n\n<li>Energy conserving solver available in RamSeries.<\/li>\n\n\n\n<li>Master\/Slave contacts implemented in RamSeries (sticking and frictionless contacts).<\/li>\n\n\n\n<li>Two-way coupling implemented in RamSeries\/SeaFEM (Body and HFS coupling).<\/li>\n\n\n\n<li>Tool for generating catenary curves available.<\/li>\n\n\n\n<li>Initial configuration analysis available in RamSeries (dynamic analyses).<\/li>\n\n\n\n<li>Ground acceleration implemented in RamSeries.<\/li>\n\n\n\n<li>Non-linear body links implemented in SeaFEM.<\/li>\n\n\n\n<li>Condition HFS implemented in SeaFEM (limited height condition).<\/li>\n\n\n\n<li>New multibodies interface for SeaFEM.<\/li>\n\n\n\n<li>New postprocessing and animation capabilities.<\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\">General improvements<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li>FSI coupling GUI improved (Tdyn\/RamSeries and SeaFEM\/RamSeries).<\/li>\n\n\n\n<li>Improvement of multibody links in SeaFEM.<\/li>\n\n\n\n<li>File coupling with SeaFEM improved in RamSeries.<\/li>\n\n\n\n<li>Two-way coupling in RamSeries\/Tdyn improved.<\/li>\n\n\n\n<li>Cable and membrane elements improved in RamSeries.<\/li>\n\n\n\n<li>Improvement of connections among different type of elements.<\/li>\n\n\n\n<li>Improved tool for calculating total weight and center of gravity. Now it also calculates inertia moments.<\/li>\n\n\n\n<li>Composite materials GUI renewed.<\/li>\n\n\n\n<li>Turbulence models (including temperature turbulence) improved.<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"new-in-version-12-1-2\">New in <strong>version 12.1.2<\/strong><\/h2>\n\n\n\n<h3 class=\"wp-block-heading\">Tdyn<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Multibody dynamics capabilities in SeaFEM (includes body links).<\/li>\n\n\n\n<li>New mooring options in SeaFEM. (New mooring types and segment links).<\/li>\n\n\n\n<li>Mooring systems can be defined independently on each body (SeaFEM).<\/li>\n\n\n\n<li>Non-linear hydrostatic effects available in SeaFEM.<\/li>\n\n\n\n<li>New options in wave spectra generation in SeaFEM (Random wave spectra repeatibility).<\/li>\n\n\n\n<li>New contact options for species advection and generic PDEs problems. Contact resistance functions available.<\/li>\n\n\n\n<li>Improvements in the update of boundary conditions in compressible models (Tdyn).<\/li>\n\n\n\n<li>Global performance optimizations in SeaFEM algorithms.<\/li>\n\n\n\n<li>GPU solver library updated.<\/li>\n\n\n\n<li>Tdyn GUI icons reviewed.<\/li>\n\n\n\n<li>General bug corrections in Tdyn and Ramseries executable files.<\/li>\n\n\n\n<li>New tools and improvements in post-processing system.<\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\">RamSeries<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Non-linear geometry implemented for all elements (Large Displacements).<\/li>\n\n\n\n<li>Follower loads implemented.<\/li>\n\n\n\n<li>New schemes implemented for dynamic analises (Energy Conserving\/Decaying)<\/li>\n\n\n\n<li>New coupling loads between Tdyn-RamSeries-SeaFEM.<\/li>\n\n\n\n<li>Cables and membrane elements available in RamSeries.<\/li>\n\n\n\n<li>New tool for creating automatic moooring lines (NURBS catenaries) (RamSeries)<\/li>\n\n\n\n<li>New tool for checking local fatigue damage (RamSeries)<\/li>\n\n\n\n<li>New tool for calculating total weight and center of gravity.<\/li>\n\n\n\n<li>Improvements in RamSeries data tree (including GUI icons review).<\/li>\n\n\n\n<li>General bug corrections in Tdyn and Ramseries executable files.<\/li>\n\n\n\n<li>New tools and improvements in post-processing system.<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"new-in-version-11-0\">New in <strong>version 11.0<\/strong><\/h2>\n\n\n\n<h3 class=\"wp-block-heading\">Tdyn<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li>New GPU solvers: BiCG, CG<\/li>\n\n\n\n<li>New GPU-CPU Preconditioners: SPAI, Deflated<\/li>\n\n\n\n<li>Improved ODDLS algorithm<\/li>\n\n\n\n<li>New VOF algorithm<\/li>\n\n\n\n<li>Lagrangian tracking tool (+ pathline + streamline)<\/li>\n\n\n\n<li>New functions<\/li>\n\n\n\n<li>New Tcl operators (including sparsematrix manipulation)<\/li>\n\n\n\n<li>Joule effect added for compressible flow.<\/li>\n\n\n\n<li>New Seakeeping module (beta)\n<ul class=\"wp-block-list\">\n<li>Potential flow solver based on waves Stokes perturbation (FEMSeakeeping module)<\/li>\n\n\n\n<li>Up to 6 degrees of freedom<\/li>\n\n\n\n<li>White noise, mono-chromatic waves and Pierson Moskowitz spectrum<\/li>\n\n\n\n<li>Mooring and non-linear external forces<\/li>\n\n\n\n<li>Coupled with the structural module<\/li>\n<\/ul>\n<\/li>\n\n\n\n<li>New postprocessing&nbsp;<a href=\"https:\/\/www.compassis.com\/compass\/es\/Informaci%C3%B3n%20t%C3%A9cnica\/Postproceso\">CompassLIB postprocess<\/a><\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\">RamSeries<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Morison Loads<\/li>\n\n\n\n<li>Improved Fluid-Structure calculations (Seakeeping, Vibrations and Ransol).<\/li>\n\n\n\n<li>Cables and membranes including pre-stressing<\/li>\n\n\n\n<li>Using paralelized solver hybrid-sparse (Pardiso)<\/li>\n\n\n\n<li>Triangular loads in beam<\/li>\n\n\n\n<li>Beams distributed torque loads<\/li>\n\n\n\n<li>32 and 64 bits version<\/li>\n\n\n\n<li>All solvers can be used in Windows and in Linux<\/li>\n\n\n\n<li>Added Von_mises, Rankine and Tresca criteria<\/li>\n\n\n\n<li>LaRC04 Three-dimensional Failure Criteria implemented for laminates<\/li>\n\n\n\n<li>More complete Tsi-Wu Security Factor, including shear stresses<\/li>\n\n\n\n<li>Added shear stresses in laminate calculations.<\/li>\n\n\n\n<li>Added option for using all elements available together (Beams, Shells, Solids, Cables and Membranes).<\/li>\n\n\n\n<li>Wrinkling algorithm for Membrane elements<\/li>\n\n\n\n<li>Dynamic custom loads<\/li>\n\n\n\n<li>J2 Plasticity model for Reissner Mindlin shell and solids<\/li>\n\n\n\n<li>New postprocessing&nbsp;<a href=\"https:\/\/www.compassis.com\/compass\/es\/Informaci%C3%B3n%20t%C3%A9cnica\/Postproceso\">CompassLIB postprocess<\/a><\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"new-in-version-10-3\">New in <strong>version 10.3<\/strong><\/h2>\n\n\n\n<ul class=\"wp-block-list\">\n<li>FSI (Coupled analyses) capabilities improvement.<\/li>\n\n\n\n<li>Tdyn Tcl Interface: new functions and improvements.<\/li>\n\n\n\n<li>Flow rate calculation (postprocess) available for linear, triangular and quad elements.<\/li>\n\n\n\n<li>Bug corrections.<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"new-in-version-10-2\">New in <strong>version 10.2<\/strong><\/h2>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Coupled Analysis management improvements.<\/li>\n\n\n\n<li>GUI improvements<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"new-in-version-10-1\">New in <strong>version 10.1<\/strong><\/h2>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Coupled Analysis management improvements.<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"new-in-version-10-0\">New in <strong>version 10.0<\/strong><\/h2>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>New Graphic user interface<\/strong>\n<ul class=\"wp-block-list\">\n<li>Data management based on XML database<\/li>\n\n\n\n<li>Completely integrates Structural calculations, Fluid and Multiphysics analyses and Coupled Fluid-Structure Interaction problems<\/li>\n\n\n\n<li>New Start-Data window to easily define the type of the analysis to be done<\/li>\n\n\n\n<li>Geometrical and mesh data can be sorted in groups and layers<\/li>\n<\/ul>\n<\/li>\n<\/ul>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Fluids and multiphysics solver<\/strong>\n<ul class=\"wp-block-list\">\n<li>New pressure stabilisation algorithm<\/li>\n\n\n\n<li>Improved turbulence boundary conditions on bodies<\/li>\n\n\n\n<li>Steady state algorithm is enhanced<\/li>\n\n\n\n<li>Improved Law of the Wall models<\/li>\n\n\n\n<li>New utility to calculate flow through a cut (in postprocess)<\/li>\n\n\n\n<li>New Tcl interface tools allowing to interpolate data from one mesh to other<\/li>\n\n\n\n<li>New boundary layer mesh generator<\/li>\n<\/ul>\n<\/li>\n<\/ul>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Coupled Fluid-Structure Interaction<\/strong>\n<ul class=\"wp-block-list\">\n<li>(One way) Static Fluid-Structure coupling for 3D beams, shells and solids<\/li>\n\n\n\n<li>(One way) Dynamic Fluid-Structure coupling for 3D beams, shells and solids<\/li>\n\n\n\n<li>Thermo-mechanical analysis for non-conformal meshes<\/li>\n\n\n\n<li>Structure &#8211; Generic PDEs multiphysics coupling<\/li>\n<\/ul>\n<\/li>\n<\/ul>\n","protected":false},"excerpt":{"rendered":"<p>News in version 16.6.2 News in version 16.6.1 News in version 16.6.0 News in version 16.2.6 News in version 16.2.5 New features General improvements NEW&hellip; <a class=\"more-link\" href=\"https:\/\/www.compassis.com\/en\/tdyn\/tdyn-releases-notes\/\">Continue reading <span class=\"screen-reader-text\">Tdyn Releases notes<\/span><\/a><\/p>\n","protected":false},"author":7,"featured_media":1894,"parent":3975,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"footnotes":""},"class_list":["post-1904","page","type-page","status-publish","has-post-thumbnail","hentry","entry"],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v27.2 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>Tdyn Releases notes - Consultancy for design in engineering<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.compassis.com\/en\/tdyn\/tdyn-releases-notes\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Tdyn Releases notes - Consultancy for design in engineering\" \/>\n<meta property=\"og:description\" content=\"News in version 16.6.2 News in version 16.6.1 News in version 16.6.0 News in version 16.2.6 News in version 16.2.5 New features General improvements NEW&hellip; Continue reading Tdyn Releases notes\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.compassis.com\/en\/tdyn\/tdyn-releases-notes\/\" \/>\n<meta property=\"og:site_name\" content=\"Consultancy for design in engineering\" \/>\n<meta property=\"article:modified_time\" content=\"2025-07-11T08:09:33+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.compassis.com\/downloads\/2022\/02\/tutorial-header.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"1920\" \/>\n\t<meta property=\"og:image:height\" content=\"447\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data1\" content=\"7 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\/\/www.compassis.com\/en\/tdyn\/tdyn-releases-notes\/\",\"url\":\"https:\/\/www.compassis.com\/en\/tdyn\/tdyn-releases-notes\/\",\"name\":\"Tdyn Releases notes - Consultancy for design in engineering\",\"isPartOf\":{\"@id\":\"https:\/\/www.compassis.com\/en\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\/\/www.compassis.com\/en\/tdyn\/tdyn-releases-notes\/#primaryimage\"},\"image\":{\"@id\":\"https:\/\/www.compassis.com\/en\/tdyn\/tdyn-releases-notes\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/www.compassis.com\/downloads\/2022\/02\/tutorial-header.jpg\",\"datePublished\":\"2021-11-26T09:09:08+00:00\",\"dateModified\":\"2025-07-11T08:09:33+00:00\",\"breadcrumb\":{\"@id\":\"https:\/\/www.compassis.com\/en\/tdyn\/tdyn-releases-notes\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/www.compassis.com\/en\/tdyn\/tdyn-releases-notes\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/www.compassis.com\/en\/tdyn\/tdyn-releases-notes\/#primaryimage\",\"url\":\"https:\/\/www.compassis.com\/downloads\/2022\/02\/tutorial-header.jpg\",\"contentUrl\":\"https:\/\/www.compassis.com\/downloads\/2022\/02\/tutorial-header.jpg\",\"width\":1920,\"height\":447,\"caption\":\"Cabecera manuales y tutoriales\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/www.compassis.com\/en\/tdyn\/tdyn-releases-notes\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/www.compassis.com\/en\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Tdyn\",\"item\":\"https:\/\/www.compassis.com\/en\/tdyn\/\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"Tdyn Releases notes\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/www.compassis.com\/en\/#website\",\"url\":\"https:\/\/www.compassis.com\/en\/\",\"name\":\"Consultancy for design in engineering\",\"description\":\"Ingenier\u00eda y Sistemas\",\"publisher\":{\"@id\":\"https:\/\/www.compassis.com\/en\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/www.compassis.com\/en\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\/\/www.compassis.com\/en\/#organization\",\"name\":\"Compass\",\"url\":\"https:\/\/www.compassis.com\/en\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/www.compassis.com\/en\/#\/schema\/logo\/image\/\",\"url\":\"https:\/\/www.compassis.com\/downloads\/2022\/07\/COMPASS_logo_Tdyn_Icono_256x.png\",\"contentUrl\":\"https:\/\/www.compassis.com\/downloads\/2022\/07\/COMPASS_logo_Tdyn_Icono_256x.png\",\"width\":256,\"height\":256,\"caption\":\"Compass\"},\"image\":{\"@id\":\"https:\/\/www.compassis.com\/en\/#\/schema\/logo\/image\/\"},\"sameAs\":[\"https:\/\/www.linkedin.com\/company\/1264339\/admin\/\"]}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Tdyn Releases notes - Consultancy for design in engineering","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.compassis.com\/en\/tdyn\/tdyn-releases-notes\/","og_locale":"en_US","og_type":"article","og_title":"Tdyn Releases notes - Consultancy for design in engineering","og_description":"News in version 16.6.2 News in version 16.6.1 News in version 16.6.0 News in version 16.2.6 News in version 16.2.5 New features General improvements NEW&hellip; Continue reading Tdyn Releases notes","og_url":"https:\/\/www.compassis.com\/en\/tdyn\/tdyn-releases-notes\/","og_site_name":"Consultancy for design in engineering","article_modified_time":"2025-07-11T08:09:33+00:00","og_image":[{"width":1920,"height":447,"url":"https:\/\/www.compassis.com\/downloads\/2022\/02\/tutorial-header.jpg","type":"image\/jpeg"}],"twitter_card":"summary_large_image","twitter_misc":{"Est. reading time":"7 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/www.compassis.com\/en\/tdyn\/tdyn-releases-notes\/","url":"https:\/\/www.compassis.com\/en\/tdyn\/tdyn-releases-notes\/","name":"Tdyn Releases notes - Consultancy for design in engineering","isPartOf":{"@id":"https:\/\/www.compassis.com\/en\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.compassis.com\/en\/tdyn\/tdyn-releases-notes\/#primaryimage"},"image":{"@id":"https:\/\/www.compassis.com\/en\/tdyn\/tdyn-releases-notes\/#primaryimage"},"thumbnailUrl":"https:\/\/www.compassis.com\/downloads\/2022\/02\/tutorial-header.jpg","datePublished":"2021-11-26T09:09:08+00:00","dateModified":"2025-07-11T08:09:33+00:00","breadcrumb":{"@id":"https:\/\/www.compassis.com\/en\/tdyn\/tdyn-releases-notes\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.compassis.com\/en\/tdyn\/tdyn-releases-notes\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.compassis.com\/en\/tdyn\/tdyn-releases-notes\/#primaryimage","url":"https:\/\/www.compassis.com\/downloads\/2022\/02\/tutorial-header.jpg","contentUrl":"https:\/\/www.compassis.com\/downloads\/2022\/02\/tutorial-header.jpg","width":1920,"height":447,"caption":"Cabecera manuales y tutoriales"},{"@type":"BreadcrumbList","@id":"https:\/\/www.compassis.com\/en\/tdyn\/tdyn-releases-notes\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.compassis.com\/en\/"},{"@type":"ListItem","position":2,"name":"Tdyn","item":"https:\/\/www.compassis.com\/en\/tdyn\/"},{"@type":"ListItem","position":3,"name":"Tdyn Releases notes"}]},{"@type":"WebSite","@id":"https:\/\/www.compassis.com\/en\/#website","url":"https:\/\/www.compassis.com\/en\/","name":"Consultancy for design in engineering","description":"Ingenier\u00eda y Sistemas","publisher":{"@id":"https:\/\/www.compassis.com\/en\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.compassis.com\/en\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/www.compassis.com\/en\/#organization","name":"Compass","url":"https:\/\/www.compassis.com\/en\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.compassis.com\/en\/#\/schema\/logo\/image\/","url":"https:\/\/www.compassis.com\/downloads\/2022\/07\/COMPASS_logo_Tdyn_Icono_256x.png","contentUrl":"https:\/\/www.compassis.com\/downloads\/2022\/07\/COMPASS_logo_Tdyn_Icono_256x.png","width":256,"height":256,"caption":"Compass"},"image":{"@id":"https:\/\/www.compassis.com\/en\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.linkedin.com\/company\/1264339\/admin\/"]}]}},"_links":{"self":[{"href":"https:\/\/www.compassis.com\/en\/wp-json\/wp\/v2\/pages\/1904","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.compassis.com\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.compassis.com\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.compassis.com\/en\/wp-json\/wp\/v2\/users\/7"}],"replies":[{"embeddable":true,"href":"https:\/\/www.compassis.com\/en\/wp-json\/wp\/v2\/comments?post=1904"}],"version-history":[{"count":10,"href":"https:\/\/www.compassis.com\/en\/wp-json\/wp\/v2\/pages\/1904\/revisions"}],"predecessor-version":[{"id":5115,"href":"https:\/\/www.compassis.com\/en\/wp-json\/wp\/v2\/pages\/1904\/revisions\/5115"}],"up":[{"embeddable":true,"href":"https:\/\/www.compassis.com\/en\/wp-json\/wp\/v2\/pages\/3975"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.compassis.com\/en\/wp-json\/wp\/v2\/media\/1894"}],"wp:attachment":[{"href":"https:\/\/www.compassis.com\/en\/wp-json\/wp\/v2\/media?parent=1904"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}