References
==========
1. E. Oñate and J. García-Espinosa. Finite Element Analysis of
Incompressible Flows with Free Surface Waves using a
Finite Calculus Formulation. ECCOMAS 2001. Swansea UK 2001.
2. E. Oñate, and J. García-Espinosa, Advanced Finite Element
Methods for Fluid Dynamic Analysis of Ships, MARNET-CFD
Workshop, Crete, Athens, 2001.
3. E. Oñate, and J. García-Espinosa, A Finite Element Method
for Fluid-Structure Interaction with Surface Waves Using a
Finite Calculus Formulation, Comput. Methods Appl. Mech.
Engrg. 191 (2001) 635-660.
4. E. Oñate and J. García-Espinosa. A methodology for analysis
of fluid-structure interaction accounting for free surface
waves. European Conference on Computational Mechanics
(ECCM99). Munich, Germany, September 1999.
5. O. Soto, R. Löhner, J. Cebral and R. Codina. A Time Accurate
Implicit-Monolithic Finite Element Scheme for
Incompressible Flow. ECCOMAS 2001. Swansea UK 2001.
6. W. Rodi. Turbulence models and their application in
hydraulics – a state of the art review. Institut für
Hydromechanik and Sonderforschungsbereich, University
of Karlsruhe, Germany, 1980.
7. J. Smagorinsky. General circulation model of the
atmosphere. Mon. Weather Rev., 91:99-164, 1963.
8. V.C.Patel, W.Rodi & G.Scheurer, Turbulence models for
near-wall and low-Reynolds-number flows: A review, AIAA J,
Vol.23, No.9, p1308, (1984)
9. B. Launder and B. Sharma. Application of the Energy
Dissipation model of Turbulence to the Calculation of Flow
near a Spinning Disk. Letters in Heat and Mass Transfer,
vol. 1, no. 2, 1974, pp. 131-138.
10. D. Wilcox. Turbulence Modelling for CFD. DCW Industries,
Inc., 5354 Palm Drive, La Cañada, California, 1993.
11. J. Bardina, P. Huang and T. Coakley. Turbulence Modelling
Validation, Testing, and Development. NASA Technical
Memorandum 110446, April 1997.
12. ERCOFTAC (European Research Community On Flow,
Turbulence And Combustion), Best Practice Guidelines for
Industrial Computational Fluid Dynamics, United Kingdom,
January 2000.
13. International Center for Numerical Methods in Engineering
(CIMNE) and COMPASS Ingeniería y Sistemas. GiD The
personal pre and postprocessing system. Documentation
available at `gid.cimne.upc.es `_
or `www.compassis.com `_
14. E. Oñate, A. Valls, J. García. FIC/FEM formulation stabilizing
terms for incompressible flows at low and high Reynolds
numbers. Comput. Mech. 38:440-455, 2006.
15. J. García, A. Valls, E. Oñate. ODDLS:A new unstructured
mesh finite element method for the analysis of free surface
flow problems. Int. J. Numer. Meth. Engng. Published
online, 2008.
16. R.B.Bird. Useful non-Newtonian models- Annu. Rev. Fluid
MEch. 8 (1976)13.
17. P.J.Carreau. Rheological equations from molecular network
theories. Trans. Soc. Rheol. 16 (1972)99.
18. M.M.Cross. Rheology of non-Newtonian fluids: a new flow
equation for pseudoplastic systems. J.ColloidSci. 20
(1965)417