Results postprocess
===================

When a simulation is running or has finished, it is possible to access the Postprocess by clicking on the 'Results' button.

.. figure:: img/eseafem_menu_results.png
  :scale: 70%
  :align: center

  `Results menu`: It opens the postprocess interface where results can be shown.

.. figure:: img/eseafem_results_post.png
  :scale: 70%
  :align: center

  General view of E-SeaFEM Postprocess. It allows to display the results of the last simulation run.

This chapter describes the specific options of E-SeaFEM Postprocess. 
The :ref:`Project<eseafem_projects>`, :ref:`Render<eseafem_render>`, :ref:`Views<eseafem_views>` and :ref:`Tools<eseafem_tools>` menus are explained in the chapter :ref:`Main window and menu options<eseafem_main_menu>`. 
The `Results tree` menu is explained in the :ref:`Tdyn Postprocess manual<postprocess_data_tree>`. 

Analysis tools
^^^^^^^^^^^^^^^

.. figure:: img/eseafem_analysis_tools.png
  :scale: 80%
  :align: center

.. _eseafem_cut_planes:

* `SeaFEM graphs`:

  .. figure:: img/eseafem_graphs.png
    :scale: 80%
    :align: center

  This option allows to show several results graphs such as `Movements`, `Velocities` or `Accelerations`.

Go back
^^^^^^^

.. figure:: img/eseafem_go_back.png
  :scale: 80%
  :align: center

It closes Postprocess and opens Preprocess again.